On the Gamma Radiation Response of Commercially Available 3D Printing Materials for Medical Dosimetry.

3D printing technology has rapidly spread for decades, allowing the fabrication of medical implants and human phantoms and revolutionizing healthcare. The objective of this study is to evaluate some radiological properties of commercially available 3D printing materials as potential tissue mimicking materials. Among fifteen materials, we compared their properties with nine human tissues. In all materials and tissues, exposure and energy absorption buildup factors were calculated for photon energies between 0.015 and 15 MeV and penetration depths up to 40 mean free path. Furthermore, the Geant4 Monte Carlo toolkit (version 10.5) was used to simulate their percentage depth dose distributions. In addition, equivalent atomic numbers, effective atomic numbers, attenuation coefficients, and CT numbers have been examined. All parameters were considered in calculating the average relative error (σ), which was used as a statistical comparison tool. With σ between 6 and 7, we found that Polylactic Acid (PLA) was capable of simulating eye lenses, blood, soft tissue, lung, muscle, and brain tissues. Moreover, Polymethacrylic Acid (PMAA) material has a σ value of 4 when modeling adipose and breast tissues, respectively. Aside from that, variations in 3D printing materials' infilling percentage can affect their CT numbers. We therefore suggest the PLA for mimicking soft tissue, muscle, brain, eye lens, lung and blood tissues, with an infill of between 92.7 and 94.3 percent. We also suggest an 89 percent infill when simulating breast tissue. Furthermore, with a 96.7 percent infill, the PMAA faithfully replicates adipose tissue. Additionally, we found that a 59 percent infill of Fe-PLA material is comparable to cortical bone. Due to the benefits of creating individualized medical phantoms and equipment, the results might be seen as an added value for both patients and clinicians.